During Use

• Routine checks on all Tech Boat stands are required. Regular examinations of blocking and stands are to ensure the utmost safety.
• Ensure no sinking has occurred on each block and each stand.
• Check stand tops and blocks for rotting and/or splitting.
• Ensure safety chains are still attached.
• Check stands to ensure a neat and snug fit still exists with the vessel above.

During Storage

• Prior to storing your Tech boat stands, rinse each stand with fresh water to remove any salt and dirt residue.
• Remove top and threaded rod from centre pipe and coat with a light film of grease. This is to avoid corrosion.
• Spray a liquid lubricant into the center pipe. This is to avoid corrosion.
• Examine all stands for rust and/or chipped paint. If required, paint exposed area with a rust preventative paint.
• Store Tech Trailer stands in a dry area.